User manual

Tandberg Data Maintenance
StorageLoader Installation and User Manual 61
Figure 6.3 Replacing the tape drive
Figure 6.4 Rear of the tape drive
Figure 6.5 Releasing the tape drive
You now have access to the rear of the tape -drive and can
dismount the SCSI cable, the ADI cable and the power cabl e.
Release the tape - drive by
pushing the spring against
the gripper - plate and
pulling the drive ca refully
backwards .
SCSI cable
ADI Cable
Power connector
For replacing the tape - drive, switch off the loader,
disconnect the power cord and remove these two
screws and the back - panel cover plate.