User manual

Tandberg Data Operation and Configuration
StorageLoader Installation and User Manual 45
cartridge is released. The cartridge is spring loaded so it is
important to prevent the cartridge from popping all the way out. If
the cartridge falls down, it may be damaged and data may be lost .
Pull the cartridge carefully out of the magazine slot.
Figure 4.18 Push the release knob
towards the cartridge to eject
Figure 4.19 Cartridge position after
manual release from magazine slot
4.8.4 Inserting a Magazine into the Unit
The right and lef t magazines are mirrored and can only be inserted
into the correct left or right magazine bay. See figure 4.20.
1. Enter the back of the m agazine into the correct magazine
bay. Make sure it is in level with the loader.
2. Slide the magazine carefully in until the eject spring
engages.
3. Push the magazine further in against the spring until the
magazine is latched.
Figure 4.20 Push magazine until it clicks into place