User manual

Tandberg Data

Operation and Configuration

StorageLoader Installation and User Manual

Note:

You cannot remove the magazine if the unit is password

protected or locked by host software through a Prevent Medium

Removal

SCSI command.

Before you can remove a magazine, the loader must be idle. When

the loader is idle, press the Menu button and select the Eject

Magazine option from t

he Main Menu.

The following screen, figure 4.14, appears, identifying the

magazine:

Exit

Eject both mags.

Select

Figure 4.14 Removing magazine

Scroll to the correct m agazine (Both, Left or Right magazine) and

press

Select

. The selected magazine will pop out 2 to 3 cm, See

next figure.

The display will show a m essage telling that the magazine or

magazines is/ are ejected. If only one magazine is ejected, the

display indicates a button to push to eject the other magazine.

Figure 4.15 Magazine eject

With one hand, grip the handle on the outer side of the magazine

bezel and hold the other hand under the magazine. Pull the

magazine carefully out and keep it in level with the loader. Use the