User manual

Tandberg Data Operation and Configuration
42 StorageLoader Installation and User Manual
3. Press the Ok button.
The robot rem oves the cartridge from the selected magazine
slot and moves it to the drive.
To unload a cartridge from drive:
1. From the default display, press the m enu button and select
Unl oad from Drive from the main menu. A screen picture like
figure 4.12 will be displaying the available slots.
Ok Cancel
Unload from drive
To Slot:
2
4678
Figure 4.12 Load to Drive
2. Select the cartridge slot num ber of your choice. Press the
button to increment and the button to decrement.
3. Press the Ok button.
The robot removes the cartridge from the drive and moves it to
the selected magazine slot.
If the drive is empty, a screen picture like the next figure is
displayed.
No cartridge in
the drive to
unload
OK
Figure 4.13 Empty Drive Message
4.8 Magazine Handling
You must remove the m agazine from the unit in order to insert or
remove cartridges. When inserting cartridges, be sure that the slot
you intend to use is not already reserved by the software
application for a cartridge in the drive. The best way to avoid
conflicts is to unload the cartridge from the drive; either through
your software application or by using the Unload from drive option
in the main menu.
4.8.1 Removing the Magazine from the Unit
The following illustration shows the correct way to rem ove the
magazine from its bay.