User manual

Tandberg Data Operation and Configuration
StorageLoader Installation and User Manual 41
4.6.3 Set Password
Item name Description
Set Password Allows the operator to set a four - digit password
protection for the menu system. The default
password is <0000>, meaning the password is
disabled.
WARNING: If you set a password, make sure you do not forget it. If you
do, it can only be cleared w ith assistance from Tandberg Data technical
support or by a qualified service technician.
4.7 Cartridge Handling
4.7.1 Cartridge Slot Numbers
The cartridge slots have been given numbers as follow: (see also
Figure 2.3 Internal components of the StorageLoader)
Left magazine: Slot 1, Slot 2, Slot 3 and Slot 4 (lowest number
closest to the front)
Right magazine: Slot 5, Slot 6, Slot 7 and Slot 8 (lowest num ber
closest to the front)
4.7.2 Moving Cartridges to and from the Drive
The norm al operations of the unit are controlled by the host
software application. When you must load or unload a specific
cartridge using the control buttons on the front panel, do the
following:
To load a cartridge to the drive:
1. From the default display press the menu button and select Load
to Drive from the m ain m enu. A screen picture like figure 4.11
will be displayed. I f a Barcode reader is implemented, the
selected cartridge’s barcode is displayed in the bottom line.
Ok Cancel
Load to drive
From Slot:
1
35
Figure 4.11 Load to Drive
2. Select the slot num ber of your choice. The system ignores
em pty slots. Press the button to increment and the button
to decrement.