User manual

Tandberg Data Operation and Configuration
40 StorageLoader Installation and User Manual
Diagnostics Displays a list of exercise test programs
Access control Set Password
4.6.1 The Maintenance Menus
Item name Description
Prepare to
Ship
When selected the robotic s will be positioned for
installation of the locking screw.
It will eject the Right magazine to facilitate the
installation.
It will also eject the left magazine if it contains
one or more cartridges. The Loader cannot be
safely shipped with cartridges in the magazines
This option must be executed before the loader
is prepared for transport by inserting the Locking
Pin. (See chapters 3.1 , Performing the
Installation and 6.4 , Reinstalling the Transport
Lock .)
Clean Drive Performs a drive clean provided a slot is
reserved for a cleaning tape and a cleaning tape
is present
Restore
default
Sets the loader settings to their f actory default
values.
Clear Web
Password
Deletes the web passwords. This is useful when
the password is lost.
Reboot Performs a hard reset of the loader.
4.6.2 The Diagnostics Menu
Item name Description
System test Starts a test where cartridges are moved
randomly between magazine slots and between
the drive and the magazines.
Move medium
test
Starts a test where cartridges are moved
randomly between magazine slots. The drive is
excluded.
Drive test Starts a drive self test. (Only when supported
by the in stalled tape drive.)
Hardware test Runs a test of the loader hardware, including
the Loader internal cabling.