User manual

Tandberg Data Operation and Configuration
StorageLoader Installation and User Manual 39
4.5.3 Remote Management Info
The Remote Management (RMM) setup is shown in the choices
listed below. This menu three is the place to find the currently
allocated dynamic IP address, default gateway and network mask
when running in DHCP mode. The MAC address of the Loader is
also shown here.
Item name Legal values Default value
IP address
mode
Static mode, DHCP mode DHCP mode
Static IP
address
0.0.0.0 to
255.255.255.255
0.0.0.0
Static netmask 0.0.0.0 to
255.255.255.255
0.0.0.0
Static default
gateway
0.0.0.0 to
255.255.255.255
0.0.0.0
Dynamic IP
address
0.0.0.0 to
255.255.255.255
Not applicable
Dynamic
netmask
0.0.0.0 to
255.255.255.255
Not applicable
Dynamic
default gateway
0.0.0.0 to
255.255.255.255
Not applicable
MAC - address Valu e is fixed Value is fixed
4.5.4 Statistics
Item name Description
Fetch
Statistics
When selected, the operator can scroll through
the fetch count and fetch retries for the drive
and all magazine slots.
Stow
Statistics
When selected, the operator can scroll through
the stow count and stow retries for the drive and
all magazine slots.
Power On
Time
Displays Power On Hours for the loader
Time since
clean
If available from the drive, this entry displays
num ber of hours since the drive was last
cleaned.
4.6 Utili ties Menu
Option Description
Maintenance Displays a set of maintenance functions