User manual

Tandberg Data Operation and Configuration
38 StorageLoader Installation and User Manual
Cleaning Slot Defined cleaning slot,
Disabled
Disabled
Barcode Reader
*
Enabled, Disabled Enabled if installed,
else Disabled
Loader Serial
No.
Loader Serial number. ---
Loader FW
revision
StorageLoader FW id
an d revision
xx.yy
Loader Vendor
ID
Current Inquiry Vendor
Id
“TANDBERG”
Loader Product
ID
Current HW/FW Product
Id
AT1280 - 1R VS160 or
AT3200 - 1R LTO2
Loader SCSI ID SCSI Id 0 to SCSI Id 15 SCSI ID = 4
Loader Parity Disabled, Enabled Enabled
Loader Slots
State
View status for each
loader slot
Not applicable
Loader
personality
VS160 : AT1280 - 1R
VS160
LTO : AT1280 - 1R
VS160
AT3200 - 1R LTO2
StorageLoader
VS160 : AT1280 - 1R
VS160
Audible Alarm Enabled, Disabled Disabled
* Can only be enabled if a barcod e scanner is installed.
4.5.2 Drive Info
The different drive types used in the StorageLoader may not
provide all the information listed below. If an unavailable entry is
selected, the string “Data Unavailable is displayed.
Item name Legal values Default value
Drive Product
ID
Drive Inquiry Product Id Drive dependent
Drive Vendor
ID
Drive Inquiry Vendor Id Drive dependent
Drive FW
Revision
Drive Firmware Revision Drive dependent
Drive Serial No. Drive Serial Number Drive dependent
Drive SCSI Id SCSI Id 0 to SCSI Id 15 SCSI ID = 5