User manual

Tandberg Data Operation and Configuration
StorageLoader Installation and User Manual 33
Here, the user can scroll through a set of options one at a time by
using the left and right arrow buttons. Only one option is shown at
a time. I n the example above, the user can select either “Ena bled”
or “Disabled” mode.
This kind of menu also has a Cancel function.
4.2.3 Messages
Messages may inform the operator about situations that arise
during operation, like error conditions and situations where a
process requires operator approval or intervention to continue.
An example of the latter is when the Loader detects a wrong type
of magazine. The loader will eject that magazine and show the
message “Left (or right) m agazine is the wrong type”. This
message is removed by inserting a correct type magazine.
4.2.4 Status and Information
Som e of the menus, dialogs and messages provide status and
inform ation in the form of one or two word messages that appear
within the display.
An example is the default screen shown in Figure 4.10. I t has a
navigation button Menu , but it displays the cartridge m ap (Map:
__3_5_7_ ) as the major menu text and the robot’s and drive’s
status (Idle, Empty).
Idle Menu
Map: _ _ 3 _ 5 _ 7 _
Drive empty
Figure 4.10 A default screen.
Another example is the Message being displayed while a
Diagnostics self-test is running. This m essage shows the progress
of the self-test in the form of a loop counter, and also shows the
robot status.