User manual

Tandberg Data Operation and Configuration
StorageLoader Installation and User Manual 27
Default screen, see figure 4.3 appears and the loader is ready for
SCSI comm ands.
The Map of the cartridges has the following symbols:
1. A “?” when status is unknown and Inventory is still running.
2. A number indicates a slot occupied by a cartridge (figure 2.3
shows how the cartridge slots are numbered in the
magazines)
3. Underscor e line indicates an empty slot
4. ‘C’ indicates that a Cleaning Cartridge occupies the slot.
The line below the map on the default screen gives the drive
status. The drive status displayed is drive dependent.
Idle Menu
Map: _ _ 3 _ 5 _ 7 _
Drive Empty
Figure 4.3 The Default screen
The robot operation status has the following options:
1 Idle The loader is idle
2 Fetching The loader is moving a cartridge from a
magazine slot or from the drive to the robot.
3 Sto wing The loader is moving a cartridge from the robot
to a magazine slot or to the drive.
4 Moving The loader is moving the robot.
Table 4 - 1 Robot Operation Statuses
Menu button
Soft Label
Robot operation status
Line 2