User manual

Tandberg Data

Operation

and Configuration

StorageLoader Installation and User Manual

Folding rule or tape measure

Screwdriver

7 mm open

end wrench

Note:

The rails are mounted to the loader during transportation.

Before mounting the rails into the rack, dismount the rails from the

loader and remove the spacers between t

he rails and the loader.

Figure 3.1 Rack Mounting kit

Installing the Rack Mounting Kit

Determine the proper position of the rails in the rack.

Caution:

Consider rack stability when deciding where to place the

StorageLoader, hazardous conditions can be the result of uneven

mechanical loading of a rack.

Rail Left Assembly

Back

Front

Rail Right Assembly