User manual

Tandberg Data Operation and Configuration
14 StorageLoader Installation and User Manual
3. Installation
This chapter provides step- by -step instructions on how to properly
prepare and install the Tandberg Data StorageLoader.
READ ME FIRST
CAUTION! !
YOU MUST REMOVE THE
ROBOT TRANSPORT LOCK
WHEN POWERING UP THE UNIT FOR THE FIRST TIME
OR IT WILL NOT OPERA TE.
SEE THE PROCEDURE ON THE FOLLOWING PAGES .
3.1 Performing the Installation
To install the StorageLoader, complete the following steps.
Step 1. Unpacking the StorageLoade r
Carefully unpack the unit from the shipping container. Save the
container and packing materials in case you need to transport the
StorageLoader in the future. The packaging is specifically designed
for the loader to ensure it is not damaged during transp ortation.
Review the contents of the shipping container to be sure that all
parts were included in the shipment. A standard package for the
StorageLoader consists of the following items:
A factory-assembled StorageLoader unit containing two
cartridge magaz ines.
A Standard Accessory Kit containing:
- 1 The Tandberg Data StorageLoader CD containing
all manuals
- 1 Printed copy of the Quick Installation Guide
- 1 Warranty/Registration Card
- Rack Mount Hardware Kit