User manual

Tandberg Data Operation and Configuration
StorageLoader Installation and User Manual 11
Internal Components
The StorageLoader features the main internal components shown
in the figure below.
Figure 2.3 Internal components of the StorageLoader
Tape Dri ve
The StorageLoader is equipped with one tape drive, which is
located in the centre in the back of the loader. The drive is a field-
replaceable unit (FRU) that can be rem oved/ replaced while the
loader is mounted in a rack. See section 6.5.1 , FRU Drive Tray
Assy DLT VS160 SCSI , section 6.5.2 , FRU Drive Tray Assy 220LTO
and 420LTO .
Robotics Module
The robotic cartridge handling mechanism m oves cartridges
between the cartridge slots in the two m agazines and the tape
drive.
Barcode Reader
The barcode reader is standard and an optional part on som e
models . When mounted, it is integrated in the Robotics Module.
Please note that StorageLoader specific bar code labels need to be
used to achieve correct operation of the bar code reader.
Slot 1
Drive
Power Supply
Right magazine
Left magazine
Slot 2
Robotics
module
Front panel
C artridges
Slot 4
Slot 3
Slot 8
Slot 7
Slot 6
Slot 5