User manual

Tandberg Data

Operation

and Configuration

StorageLoader Installation and User Manual

any activity is always visi

ble on the display.

LED Indicators

The two LED indicators are green and amber. They indicate the

StorageLoader activity as follows:

Green LED on: The StorageLoader is either running or ready

for operation.

Green LED blinking: Short blinks followed by long intervals

indicate that the loader is in low power standby mode.

Am ber LED on: Fault LED, the StorageLoader has

encountered an electrical or mechanical failure.

Both LED’s off: The StorageLoader is offline. This is the case

while the loader is initializing, after power-on, and when a

magazine is removed.

Standby Switch

A switch on the front panel provides a Loader Standby. I f the

switch is pushed when the loader is active, the loader will complete

the current operation and go off line and enter standby mode, see

more details in chapter

4.9

Standby Functionality

Magazine Front Bezel

The front bezel of the magazines is visible from the front.

All

magazine handling is described in detail in chapter

4.8

Magazine

Handling