User manual

Tandberg Data Operation and Configuration
StorageLoader Installation and User Manual 9
An Ethernet connection allows for management by an
operator with a standard web browser on a rem ote
com puter. The remote operator can do most of the
operations that can be done through the front panel, such as
monitoring the loader’s status and downloading statistical
and diagnostic information.
For information on the installed tape drive; see the tape drive
manuals referred to in chapter 1.
2.2.1 Front Panel
The Front Panel includes the User Control Panel with LCD display,
four Control Buttons, two LED indicators and a Standby switch.
The bezels of the two magazines are also visible from the front.
Magazine
front bezel
LED
indicators
Standby
switch
LCD
display
Control
buttons
Magazine
front
bezel
Figure 2.2 Front panel of the StorageLo ader
LCD – liquid crystal display
The display is a backlit 122 x 32, dot-matrix graphical display that
can show four lines of 20 characters.
In various m odes of operation, the display panel screens and
contr ol buttons allow you to do the following:
Enter settings for StorageLoader configuration
Issue operational commands
View StorageLoader status and information
Test StorageLoader functionality
Control Buttons
The labels for the four control buttons are displayed in the corners
of the LCD. All buttons have “soft labeling” for different m odes of
operation (i.e., the functions and labels of the buttons change
during different activities). The actual soft label for each button for