Datasheet

14
StorageLoader 2U LTO
™
SETTING THE STANDARDS FOR ENTRY-LEVEL LTO™ TAPE AUTOMATION
The Tandberg StorageLoader 2U LTO is ideally suited for SMB or departments looking for a
cost effective storage solution that provide them with just the right mix of reliability
and scalability.
The Tandberg StorageLoader 2U LTO offers outstanding value for IT departments that need
capacities up to 32TB*. The Capacity on Demand (COD) feature allows users to easily increase
usable capacity (from 10 to 20 slots) as their data grows. With a choice of one
LTO-3 or LTO-4 SCSI or FC drives or one or two LTO-2 or LTO-3 HH drives, and the flexibility of
Performance on Demand (POD), users can add drives or upgrade to next generation technology
to increase their library’s performance when they need it.
The StorageLoader 2U LTO has a host of management and maintenance features, ensuring
minimized down-time and ease of management. Using the browser based remote management
interface, administrators can remotely monitor, control, configure and diagnose the
StorageLoader 2U LTO via the Internet from anywhere in the world.
The StorageLoader 2U LTO comes with a 1 year Advanced Replacement Service warranty
(on component level only) and a 3 year factory warranty.
Tandberg LTO tape automation solutions are compatible with industry standard, multi-sourced
LTO media. To achieve the best reliability, Tandberg LTO branded and qualified data cartridges
are recommended.
15
StorageLoader 2U LTO Advantages
WIDE VARIETY OF DRIVE
Supports up to two Ultrium LVD SCSI LTO-2 or LTO-3 HH drives, one LVD
SCSI LTO-3 or LTO-4 drive or one native FibreChannel LTO-4 drive.
FULLY SCALABLE
Base unit is kitted with one or two 10-cartridge-magazine, that includes one
Import/Export (I/E) port and can be scaled up to a 20-cartridge system by
adding an additional magazine. Easily and inexpensively double your speed
by upgrading to a second Ultrium LTO-2 drive, even when installed in a rack,
creating one of the world’s first 2U dual drive LTO loader.
BETTER PERFORMANCE
Delivers up to 8 to 32TB* of capacity at a transfer rate of up to 864GB/hr*.
USER FRIENDLY
Uses an intuitive, user-friendly LCD interface for configuration, status,
diagnostic, and help functions.
ADI SUPPORT
Featuring Automation/Drive Interface (ADI) that reduces cost, increases
automation reliability to ensure greater end user simplicity.
FIELD UPGRADEABLE PARTS
Capacity on Demand (COD) enables easy increase of usable capacity
as data grows, by upgrading from 10 to 20 slots, or by adding or
upgrading dries.
Autoloaders
MEDIA COMPATIBILITY CHART
TAPE FORMAT LTO-2 HH LTO-3 LTO-4
LTO Ultrium 1 R / W R
LTO Ultrium 2 R / W R / W R
LTO Ultrium 3 R / W R / W
LTO Ultrium 4 R / W
* Based on a 2:1 Data Compression Rate
TANDBERG STORAGELOADER 2U LTO DRIVES SPECIFICATIONS
MODEL LTO-2 HH LTO-3 FH LTO-3 HH LTO-4 FH
Max Capacity - TB
(Native / Comp*)
4 / 8* 8 / 16* 8 / 16* 16 / 32*
Transfer Rate - MB/s* 24 / 48* 80 / 160* 60 / 160* 120 / 240*
Form Factor 2U 2U 2U 2U
No. of Drives 2 1 1 1
No. of Slots 10 or 20 10 or 20 10 or 20 10 or 20
Interface Ultra 160
SCSI / LVD
Ultra 160 SCSI /
LVD / FC
Ultra 160 SCSI /
LVD / FC
Ultra 160 SCSI /
LVD / FC
DESCRIPTION PART NO.
With 1 x LTO-3 HH Drive 10 slots 052112
20 slots 052113
With 1 x LTO-4 FH Drive SCSI 10 slots 2406-LTO
20 slots 2407-LTO
With 1 x LTO-4 FH Drive FC 10 slots 2456-LTO
20 slots 2457-LTO
For more configurations please visit www.TandbergData.com