User manual
Table Of Contents
- 1. About This Manual
- 2. General Information
- 3. Installation
- 3.1 Performing the Installation
- Step 1. Unpacking the StorageLoader
- Step 2. Installing the StorageLoader in a Rack
- Installing the Rack Mounting Kit
- Installing the “Rail Left Assembly”
- Installing the “Rail Right Assembly”
- Mounting the StorageLoader to the Rack
- How to dismount the StorageLoader from the rack
- Step 3. Connecting Power Cable
- Step 4. Removing the Transport Lock
- Step 5. Running Power-On Selftest
- Step 6. Setting the SCSI Address
- Step 7. Connecting the SCSI Bus Cable
- Step 8. Connecting the Ethernet Connector
- Step 9. Restarting Your System
- Step 10. BCR: Labelling of cartridges
- Step 1. Unpacking the StorageLoader
- 3.1 Performing the Installation
- 4. Operation and Configuration
- 1.
- 5. Remote Management
- 6. Maintenance
- 7. Troubleshooting
- Appendix A – Specifications
- Appendix B – Spare parts/Accessories
- Appendix C – Field Replacement Units (FRUs)
Tandberg Data Maintenance
Altitude
Operating Range -500 to 10000 ft
Non-Operating Range -500 to 40000 ft
Table A - 9 StorageLoader altitude specification
A.8 Noise Specification
Acoustic
Idle (L
w
A) 60 dBA
Operating (L
w
A) 65 dBA
Table A - 10 StorageLoader noise specification
A.9 Product Reliability
MTBF: 250.000 hours for StorageLoader electronics
MSBF: 500.000 Mean cartridge swaps between failures
Appendix B – Spare
parts/Accessories
Type Description P/N
Magazine Left LTO S808738
Magazine Right LTO S808739
FRU Fan S808740
FRU Power Supply S808696
FRU Filter S808741
Spare parts
Rackmount Rail Kit 1U S808703
Accessory kit LTO 870840 Accessories
Quick Installation Guide 433761-01
Table B - 1 List of spare parts and accessories
FRU Drive Tray Assey: Contact your sales representative for correct part number.
StorageLoader Installation and User Manual 69