User manual

Tandberg Data Operation and Configuration
No cartridge in
the drive to
unload
OK
Figure 4.13 Empty Drive Message
4.8 Magazine Handling
You must remove the magazine from the unit in order to insert or remove cartridges.
When inserting cartridges, be sure that the slot you intend to use is not already
reserved by the software application for a cartridge in the drive. The best way to
avoid conflicts is to unload the cartridge from the drive; either through your
software application or by using the Unload from drive option in the main menu.
4.8.1 Removing the Magazine from the Unit
The following illustration shows the correct way to remove the magazine from its
bay.
Note: You cannot remove the magazine if the unit is password protected or locked
by host software through a Prevent Medium Removal SCSI command.
Before you can remove a magazine, the loader must be idle. When the loader is idle,
press the Menu button and select the Eject Magazine option from the Main Menu.
The following screen, figure 4.14, appears, identifying the magazine:
▲ Exit
Eject both mags.
▼ Select
Figure 4.14 Removing magazine
36 StorageLoader Installation and User Manual