User manual

Tandberg Data Operation and Configuration
Left magazine: Slot 1, Slot 2, Slot 3 and Slot 4 (lowest number closest to the front)
Right magazine: Slot 5, Slot 6, Slot 7 and Slot 8 (lowest number closest to the front)
4.7.2 Moving Cartridges to and from the Drive
The normal operations of the unit are controlled by the host software application.
When you must load or unload a specific cartridge using the control buttons on the
front panel, do the following:
To load a cartridge to the drive:
1. From the default display press the menu button and select Load to Drive from
the main menu. A screen picture like figure 4.11 will be displayed. If a Barcode
reader is implemented, the selected cartridge’s barcode is displayed in the
bottom line.
Ok Cancel
Load to drive
From Slot:
1
35
3 4
Figure 4.11 Load to Drive
2. Select the slot number of your choice. The system ignores empty slots. Press the
4 button to increment and the 3 button to decrement.
3. Press the Ok button.
The robot removes the cartridge from the selected magazine slot and moves it to
the drive.
To unload a cartridge from drive:
1. From the default display, press the menu button and select Unload from Drive
from the main menu. A screen picture like figure 4.12 will be displaying the
available slots.
Ok Cancel
Unload from drive
To Slot:
2
4678
3 4
Figure 4.12 Load to Drive
2. Select the cartridge slot number of your choice. Press the 4 button to increment
and the 3 button to decrement.
3. Press the Ok button.
The robot removes the cartridge from the drive and moves it to the selected
magazine slot.
If the drive is empty, a screen picture like the next figure is displayed.
StorageLoader Installation and User Manual 35