User manual
Table Of Contents
- 1. About This Manual
- 2. General Information
- 3. Installation
- 3.1 Performing the Installation
- Step 1. Unpacking the StorageLoader
- Step 2. Installing the StorageLoader in a Rack
- Installing the Rack Mounting Kit
- Installing the “Rail Left Assembly”
- Installing the “Rail Right Assembly”
- Mounting the StorageLoader to the Rack
- How to dismount the StorageLoader from the rack
- Step 3. Connecting Power Cable
- Step 4. Removing the Transport Lock
- Step 5. Running Power-On Selftest
- Step 6. Setting the SCSI Address
- Step 7. Connecting the SCSI Bus Cable
- Step 8. Connecting the Ethernet Connector
- Step 9. Restarting Your System
- Step 10. BCR: Labelling of cartridges
- Step 1. Unpacking the StorageLoader
- 3.1 Performing the Installation
- 4. Operation and Configuration
- 1.
- 5. Remote Management
- 6. Maintenance
- 7. Troubleshooting
- Appendix A – Specifications
- Appendix B – Spare parts/Accessories
- Appendix C – Field Replacement Units (FRUs)
Tandberg Data Operation and Configuration
4.5.3 Remote Management Info
The Remote Management (RMM) setup is shown in the choices listed below. This
menu three is the place to find the currently allocated dynamic IP address, default
gateway and network mask when running in DHCP mode. The MAC address of the
Loader is also shown here.
Item name Legal values Default value
IP address mode Static mode, DHCP mode DHCP mode
Static IP address 0.0.0.0 to 255.255.255.255 0.0.0.0
Static netmask 0.0.0.0 to 255.255.255.255 0.0.0.0
Static gateway 0.0.0.0 to 255.255.255.255 0.0.0.0
Dynamic IP
address
0.0.0.0 to 255.255.255.255 Not applicable
Dynamic netmask 0.0.0.0 to 255.255.255.255 Not applicable
Dynamic gateway 0.0.0.0 to 255.255.255.255 Not applicable
MAC-address Value is fixed Value is fixed
4.5.4 Statistics
Item name Description
Fetch Statistics When selected, the operator can scroll through the fetch
count and fetch retries for the drive and all magazine slots.
Stow Statistics When selected, the operator can scroll through the stow count
and stow retries for the drive and all magazine slots.
Power On Time Displays Power On Hours for the loader
Time since clean If available from the drive, this entry displays number of
hours since the drive was last cleaned.
4.6 Utilities Menu
Option Description
Maintenance Displays a set of maintenance functions
Diagnostics Displays a list of exercise test programs
Access control Set Password
4.6.1 The Maintenance Menus
Item name Description
StorageLoader Installation and User Manual 33