User manual

Tandberg Data Operation and Configuration
Here, the user can scroll through a set of options one at a time by using the left and
right arrow buttons. Only one option is shown at a time. In the example above, the
user can select either “Enabled” or “Disabled” mode.
This kind of menu also has a Cancel function.
4.2.3 Messages
Messages may inform the operator about situations that arise during operation, like
error conditions and situations where a process requires operator approval or
intervention to continue.
An example of the latter is when the Loader detects a wrong type of magazine. The
loader will eject that magazine and show the message “Left (or right) magazine is
the wrong type”. This message is removed by inserting a correct type magazine.
4.2.4 Status and Information
Some of the menus, dialogs and messages provide status and information in the form
of one or two word messages that appear within the display.
An example is the default screen shown in Figure 4.10. It has a navigation button
Menu, but it displays the cartridge map (Map: __3_5_7_ ) as the major menu text
and the robot’s and drive’s status (Idle, Empty).
Idle Menu
Map: __3_5_7_
Drive empty
Figure 4.10 A default screen.
Another example is the Message being displayed while a Diagnostics self-test is
running. This message shows the progress of the self-test in the form of a loop
counter, and also shows the robot status.
28 StorageLoader Installation and User Manual