User manual
Table Of Contents
- 1. About This Manual
- 2. General Information
- 3. Installation
- 3.1 Performing the Installation
- Step 1. Unpacking the StorageLoader
- Step 2. Installing the StorageLoader in a Rack
- Installing the Rack Mounting Kit
- Installing the “Rail Left Assembly”
- Installing the “Rail Right Assembly”
- Mounting the StorageLoader to the Rack
- How to dismount the StorageLoader from the rack
- Step 3. Connecting Power Cable
- Step 4. Removing the Transport Lock
- Step 5. Running Power-On Selftest
- Step 6. Setting the SCSI Address
- Step 7. Connecting the SCSI Bus Cable
- Step 8. Connecting the Ethernet Connector
- Step 9. Restarting Your System
- Step 10. BCR: Labelling of cartridges
- Step 1. Unpacking the StorageLoader
- 3.1 Performing the Installation
- 4. Operation and Configuration
- 1.
- 5. Remote Management
- 6. Maintenance
- 7. Troubleshooting
- Appendix A – Specifications
- Appendix B – Spare parts/Accessories
- Appendix C – Field Replacement Units (FRUs)
Tandberg Data Operation and Configuration
or when the internal temperature in the StorageLoader gets too high. The cooling
fans are field replaceable units, see Appendix C.
Main Power Switch/ Fuse/Power cord connection
The main power switch is found on the rear of the loader on the power supply
bracket. The power switch, the fuse holder (with a 250V 2A (H) fuse) and the AC
power cord connection are combined in one common unit.
SCSI Interface Connectors
The StorageLoader has two shielded 68-pin HD SCSI connectors on the rear panel.
The connectors are used for connecting the tape drive to a SCSI bus. These
connectors can link to the following:
• A shielded male HD SCSI cable
• A shielded male HD SCSI terminator.
Ethernet Port
This port is for the Remote Management system and allows you to connect the
StorageLoader to a 10/100 BaseT Ethernet network.
Back Panel Cover Plate
Removing the Back Panel Cover Plate gives you access to all the field-replaceable
units located at the back of the StorageLoader.
10 StorageLoader Installation and User Manual