Datasheet

APRIL 2007 STORAGELOADER 2U LTO
77
SETTING CONFIGURATION OPTIONS
4.
4.4.
4. Press Modify. Press or to switch between Enable and Disable.
5.
5.5.
5. With the arrow pointed to Enable, press Select.
Note: The password can be between 3 and 11 characters long and consists
of upper case alphabet letters (“A” to “Z”), lower case alphabet letters
(“a” to “z”), and numbers (“0” to “9”).
Characters increment as follows:
The blank allows you to truncate the password at the current letter and will
remove all characters beyond that point. If you continue to press” “, the
characters will begin again at “A” (upper case A).
6.
6.6.
6. Press to increase the letter (the library starts at “A”).
7.
7.7.
7. Press ( ) to move to the next field and repeat step 8.
Pressing the ( ) button scrolls the cursor through the current letters of the
password, including an extra “blank” character at the end, which allows
you to add to the length of the password. Scrolling beyond the end of the
password causes the cursor to wrap to the first character of the password.
Password
> Enable
Disable
Select Back
+–
–+
First
(upper case
letters)
Second
(lower case
letters)
Third
(numbers)
Last
(blank space)
(if the cursor is beyond the
third character)
“A” to “Z” “a” to “z” “0” to “9” ““
Password
AAA
Done Back
+
+
+