Datasheet

76
PRODUCT MANUAL 1016988
CHAPTER 3—CONFIGURING THE LIBRARY
SETTING UP LIBRARY PASSWORD PROTECTION
To prevent unauthorized users from disrupting library operation, you can set
up a password for accessing operator panel menus. When you enable the
password, all operator panel functions are prevented. When you press any of
the main menu buttons (Move, Lib, Maint, or Drive), the library prompts you
for the password.
Note: If you are using the library’s Remote Management utility (see Chapter 4),
you can set up a separate password to prevent unauthorized users from
using the utility to access the library’s configuration settings.
If you forget the password, see “Getting your password hint” on page 80.
Setting up an operator panel password
To set up a password for the operator panel:
1.
1.1.
1. At the Home screen, press Lib.
If necessary, enter the operator panel password (see page 78).
2.
2.2.
2. Press until the selection arrow ( ) points to Password.
3.
3.3.
3. Press Select.
Library
Library ID
Inventory
Password
Select Language
Library Settings
Select Back
Password
Password:
Disabled
Modify OK