Datasheet

68
PRODUCT MANUAL 1016988
CHAPTER 3—CONFIGURING THE LIBRARY
1.
1.1.
1. To change the DHCP setting, press or until the selection arrow ( )
points to DHCP.
2.
2.2.
2. Press Select.
3.
3.3.
3. Press Modify. Press or to toggle between Enable and Disable.
Disabling DHCP addressing (assigned by the server) enables Static
addressing (a fixed IP address).
4.
4.4.
4. Press Select.
5.
5.5.
5. Press OK.
Ethernet
DHCP
IP Address
Subnet Mask
Gateway
MAC Address
Select Back
Ethernet
DHCP: Disabled
Modify OK
+–
!
! !
! Important
Dynamic assignment of the library’s IP address may require
periodic reinstallation or reconfiguration of some monitoring
software applications.