Datasheet

62
PRODUCT MANUAL 1016988
CHAPTER 3—CONFIGURING THE LIBRARY
Activating the Cleaning Cartridge Cell
Activating the cleaning cartridge cell designates the storage location for a
cleaning cartridge. Use one of the following options:
 Slot/Cell 2—if the I/E Port is enabled
 Slot/Cell 1—if the bottom I/E Port is disabled
Note: The library ships from the factory with the I/E Port enabled. In order to use
that slot/cell as the fixed cleaning slot, you need to disable it. See “Enabling
and Disabling the I/E Port” on page 47.
To activate the cleaning cartridge cell:
1.
1.1.
1. At the Home screen, press Maint.
If necessary, enter the operator panel password (see page 78).
2.
2.2.
2. Press until the selection arrow ( ) points to Cleaning Options.
3.
3.3.
3. Press Select.
4.
4.4.
4. Press or until the selection arrow ( ) points to Fixed Cleaning Slot.
Maintenance
Library Maintenance
Drive Maintenance
Cleaning Options
System Reset
USB Options
Select Back
Cleaning Options
Clean Drive
Fixed Cleaning Slot
Auto Cleaning
Cleaning Tape
Select Back