Datasheet

60
PRODUCT MANUAL 1016988
CHAPTER 3—CONFIGURING THE LIBRARY
Setting the Restart Option
The Restart option determines what the library does after it is reset, power
cycled, or when a magazine has been re-inserted.
a.
a.a.
a. At the Restart screen, press or to select Enable or Disable.
b.
b.b.
b. Press Select, and then continue with Setting the Loop Option.
Setting the Loop Option
The Loop option determines what the library does after it has finished
processing the last cartridge in the sequence.
a.
a.a.
a. At the Loop screen, press or to select Enable or Disable.
b.
b.b.
b. Press Select.
Setting The library...
Enabled restarts at the beginning of the cartridge sequence
Disabled resume where it left off when the interruption occurred
Restart
> Enable
Disable
Select Back
+–
–+
Setting The library...
Enabled loops back to the first cartridge in the sequence and begins
processing the cartridges again
Disabled stops and waits for operator intervention.
You need to set the library to operate in Random mode,
and then reset it to Sequential mode
Loop
Enable
> Disable
Select Back
+–
–+