Datasheet

58
PRODUCT MANUAL 1016988
CHAPTER 3—CONFIGURING THE LIBRARY
Random is the default operating mode for the library. To change the operating
mode to Sequential, you need to enable the Sequential Mode, and set the
Restart and Loop options.
1.
1.1.
1. At the Home screen, press Lib.
If necessary, enter the operator panel password (see page 78).
2.
2.2.
2. Press until the selection arrow ( ) points to Library Settings.
3.
3.3.
3. Press Select.
4.
4.4.
4. Press until the selection arrow ( ) points to Operation Mode.
Library
Library ID
Inventory
Password
Select Language
Library Settings
Select Back
Library Settings
Operation Mode
X
Ethernet
Display Settings
Storage Settings
Restore Defaults
Select Back