Datasheet

APRIL 2007 STORAGELOADER 2U LTO
57
SETTING CONFIGURATION OPTIONS
6.
6.6.
6. Press until the selection arrow ( ) points to the desired mode, and then
press Select.
The LCD displays the following screen:
7.
7.7.
7. Press OK.
8.
8.8.
8. Press Back (as needed) to return to the Home screen.
SETTING THE LIBRARY TO OPERATE IN SEQUENTIAL MODE
The operation mode determines how the library processes cartridges. The
library will operate using one of these two options.
 Random–The library processes cartridges according to commands issued
from an application.
 Sequential–The library processes cartridges sequentially without direction
from an application.
In Sequential mode, magazines are automatically associated with tape drives
so that each tape drive and its associated magazine (or magazines) becomes an
independent autoloader.
Emulation Mode
Native
X
Exabyte 221L
Exabyte 210
Exabyte EZ17
Select Back
(Emulation Mode)
Good
OK
!
! !
! Important
If you are using a backup application which is capable of
controlling the library, do not configure the library to operate
in Sequential mode.