Datasheet

APRIL 2007 STORAGELOADER 2U LTO
55
SETTING CONFIGURATION OPTIONS
CHANGING THE EMULATION MODE
By default, the library operates in Native emulation mode and returns the
product identification, “MAGNUM 224,” in response to a SCSI INQUIRY
command from an application. If your library software has not yet been
certified for the StorageLoader 2U LTO, you can select an option in Ta b l e 3 - 6 ,
which lists the available emulation modes for the library.
Note: If you change the emulation mode, you will need to reboot your host
computer so that it recognizes the new emulation mode.
Because most backup applications are certified for one or more of these
libraries, changing the emulation mode may allow these applications to
support the library.
To change the emulation mode:
1.
1.1.
1. At the Home screen, press Lib.
If necessary, enter the operator panel password (see page 78).
2.
2.2.
2. Press until the selection arrow ( ) points to Library Settings.
Table 3-6 Emulation modes for the StorageLoader 2U LTO
Emulation Mode Returns this Product Identification in response to an
INQUIRY command
Native The default Product Identification stored in the library’s
microcode.
Exabyte 221L “Exabyte_221L” where each “_” represents an ASCII space
character.
Exabyte EZ17 “Exabyte_EZ17____” where each “_” represents an ASCII
space character.
Exabyte 210 “EXB-210_ _ _ _ _ _ _ _ _” where each “_” represents an
ASCII space character.
Library
Library ID
Inventory
Password
Select Language
Library Settings
Select Back