Datasheet

42
PRODUCT MANUAL 1016988
CHAPTER 3—CONFIGURING THE LIBRARY
4.
4.4.
4. Press Select to accept the change, or Back to restore the previous value.
5.
5.5.
5. Press OK to continue.
6.
6.6.
6. Press Back (as needed) to return to the Home screen.
Changing the Contrast
The contrast setting changes the contrast of the Liquid Crystals. Too high a
value will “wash out” the display, and too low a value will cause darkness and
streaking.
To change the LCD contrast:
1.
1.1.
1. At the Home screen, press Lib.
If necessary, enter the operator panel password (see page 78).
2.
2.2.
2. Press until the selection arrow ( ) points to Library Settings.
3.
3.3.
3. Press Select.
4.
4.4.
4. Press until the selection arrow ( ) points to Display Settings.
5.
5.5.
5. Press Select.
Library
Library ID
Inventory
Password
Select Language
Library Settings
Select Back
Library Settings
Emulation Mode
Ethernet
Display Settings
X
Storage Settings
Restore Defaults
Select Back