Datasheet

34
PRODUCT MANUAL 1016988
CHAPTER 3—CONFIGURING THE LIBRARY
Ta b l e 3 - 3 shows the current state <command-states> of the commands.
If a hardware error occurs, an error message appears on the Home screen.
Refer to Chapter 8 and Appendix E for help in diagnosing and correcting
errors. You must correct the error before operation can continue.
If a menu is currently displayed on the LCD and you want to view the Home
screen, press the “Back” button (see example below) until the Home screen
appears.
Table 3-3 Library command-state status messages
Message Meaning
Calibrate The library is calibrating a mechanism.
Positioning The library is positioning the robot to the desired location.
Loading The library is loading a cartridge into a tape drive.
Wait Drive Load The library is waiting for a tape drive to complete a load.
Unloading The library is unloading a cartridge from a tape drive.
Wait Drive
Unload
The library is waiting for a tape drive to complete an unload.
Scanning The library is scanning a bar code.
Unlock The library is unlocking the I/E port or a magazine.
Lock The library is locking the I/E port.
Picking The robot removing a cartridge from an element (slot, I/E port,
or a tape drive).
Putting The robot placing a cartridge into an element (slot, I/E port, or
a tape drive).
Drive
Drive ID
Interface
Drive Configuration
Library SCSI bridge
Select Back