Datasheet

26
PRODUCT MANUAL 1016988
CHAPTER 2—INSTALLING THE LIBRARY
5.
5.5.
5. Dislodge the shipping lock–first step. Grasp the lock handle and gently
push the lock to the right approximately one inch (2.5cm). This moves the
lock off of critical components on the robot.
6.
6.6.
6. Dislodge the shipping lock–second step. While holding the lock handle,
carefully rotate the back of the lock up toward the top of the library
approximately two inches (5cm), and then lift the front of the lock up
approximately two inches (5cm).
Lifting the lock completely above the robot enables you to remove it
without damaging the robot.
Figure 2-15 Shipping lock removal–steps 5 and 6
6.
5.
Lock handle
Front view
Front isometric view
Lock handle
6.
!
! !
! Important
If you do not remove (rotate and lift) the lock as described in the next
two steps, you can “catch” and damage cables inside the library and
render it useless.