Datasheet

APRIL 2007 STORAGELOADER 2U LTO

233

REPLACING THE SHIPPING LOCK

Follow these steps to replace the shipping lock.

SHIPPING LOCK INSTALLATION

1.1.

1. Remove the left magazine. Press the left magazine eject button. While

supporting it, gently slide the magazine straight out of the library.

2.2.

2. Power the library off. Press the 0 on the back panel.

Figure D-1 Shipping lock

Lock handle

Tab

Caution

This step must be completed after you “park the robot” described in the

previous section. You can damage the robot if it is not fully parked prior to

installing the lock. See “Preparing the Library for Shipping” on page 231.

Caution

Use care not to twist the magazine or move it side to side as you insert or

remove it from the library. Not inserting it straight into / pulling it straight out of

the opening can damage components inside the library.

Figure D-2 Shipping lock replacement–step 1

No up and down or

side to side movement

Left magazine button