Datasheet

6
PRODUCT MANUAL 1016988
CHAPTER 1—PRODUCT OVERVIEW
 SCSI Connectors—If the tape drive(s) installed in the library have SCSI
connectors, they can accommodate one of the following.
 Half height LTO-2
SCSI connector—An Ultra 160 SCSI connector (minimum rating)
Terminator—An Ultra 3 Active SCSI terminator (minimum rating)
 Half height LTO-3
SCSI connector—An Ultra 160 SCSI connector (minimum rating)
Terminator—An Ultra 3 Active SCSI terminator (minimum rating)
 Full height LTO-3
SCSI connector—An Ultra 160 SCSI connector (minimum rating)
Terminator—An Ultra 3 Active SCSI terminator (minimum rating)
 Fibre Channel Connector—If the tape drive installed in the library has a
Fibre Channel (FC) connector, they accommodate connection to a 50-micron
or 62-5 micron multi-mode optical fibre cable with LC connectors.
Fan The system fan provides cooling for the library and the tape drive(s).
Power Cord Connection The power cord connection provides AC power to
the library and the tape drive(s).
Power Switch The power switch allows you to turn power on and off for the
library and the enclosed tape drive(s).
Figure 1-3 Library’s back panel components (FC configuration)
Power cord
FC connector
Fan
Tape drive
cover plate
connector
Power
switch