Datasheet

APRIL 2007 STORAGELOADER 2U LTO
193
LTOTOOL—TAPE DRIVE FIRMWARE UPGRADE
4.
4.4.
4. Press or until the selection arrow ( ) points to Save Library Logs.
5.
5.5.
5. Press Select.
6.
6.6.
6. Press OK to continue with the action, or Back to cancel the action.
Tandberg Data Corporation Technical Support can examine the log to
determine the nature of the reported error (see “Contacting Tandberg Data
Corporation” on page iii).
7.
7.7.
7. Press Back (as needed) to return to the Home screen.
LTOTOOL—TAPE DRIVE FIRMWARE UPGRADE
To upgrade firmware and create diagnostic listings for the LTO tape drive(s),
download LTOTool. LTOTool allows you to upgrade firmware and perform
diagnostics over the library’s SCSI bus.
 LTOTool is available as a free download at www.tandbergdata.com.
 Refer to the readme file provided with the program for installation
instructions.
 Refer to the program’s online help for instructions on performing
upgrades and diagnostics.
USB Options
New Library Code
New Drive Code
Save Configuration
Get Configuration
Save Library Logs
Select Back
Pending Action:
Save Library Logs
IdumpUSB.bin
Continue?
Ok Back