Datasheet

182
PRODUCT MANUAL 1016988
CHAPTER 7—MAINTENANCE
4.
4.4.
4. Press until the selection arrow ( ) points to Drive Diagnostics.
5.
5.5.
5. Press Select.
6.
6.6.
6. Press or until the selection arrow ( ) points to Drive Self Test.
7.
7.7.
7. Press Select.
8.
8.8.
8. Press OK to perform the test.
9.
9.9.
9. Press Back (as needed) to return to the Home screen.
RUNNING LIBRARY DIAGNOSTICS
To check basic library functions, you can run a set of diagnostic tests from the
operator panel. These tests check the library’s electronics and SCSI functions.
If you report a problem to Tandberg Data Corporation Technical Support, you
may be asked to run these tests and provide the results.
PERFORMING A DIGITAL SELF TEST
To perform a digital self test on the library:
Drive Maintenance
Drive Diagnostics
Select Back
Drive Diagnostics
Drive Self Test
Select Back
Pending Action:
Drive Self Test
Continue?
OK Back