Datasheet

158
PRODUCT MANUAL 1016988
CHAPTER 6—VIEWING LIBRARY INFORMATION
Notes: The slot/cell count changes depending on whether you have the I/E
Port and the fixed cleaning slot enabled or disabled. If there is no
cartridge in the slot/cell that you are viewing, the library indicates an
(empty) status.
If you enabled the Media Identifier (see “Enabling the Media
Identifier” on page 48), the library also displays the type of cartridge
(LTO-2, LTO-3, and so forth). The library scans the bar code label, not
the cartridge, so if you affix an LTO-2 bar code label to an LTO-3 data
cartridge, it displays as an LTO-2 cartridge.
6.
6.6.
6. Press or to move between the slots.
This moves the cursor to the next (or previous) occupied slot and shows the
slot number and the barcode number (if there is a cartridge and it has a
barcode). The library skips slots that do not contain a cartridge.
7.
7.7.
7. Press Back (as needed) to return to the Home screen.
Tape drive inventory
To view a tape drive’s inventory:
1.
1.1.
1. At the Home screen, press Lib.
If necessary, enter the operator panel password (see page 78).
2.
2.2.
2. Press until the selection arrow ( ) points to Inventory.
3.
3.3.
3. Press Select.
Library
Library ID
Inventory
Password
Select Language
Library Settings
Select Back
+–