Datasheet

156
PRODUCT MANUAL 1016988
CHAPTER 6—VIEWING LIBRARY INFORMATION
2.
2.2.
2. Press until the selection arrow ( ) points to Library SCSI Bridge.
3.
3.3.
3. Press Select.
4.
4.4.
4. Press OK.
5.
5.5.
5. Press Back (as needed) to return to the Home screen.
VIEWING AND UPDATING THE CARTRIDGE INVENTORY
The library maintains a cartridge inventory to keep track of where cartridges
are located. In performing an inventory, the library checks for cartridges in the
cells and scans each cartridge’s bar code label. The library uses this
information to process commands from an application.
VIEWING CARTRIDGE INVENTORY
A cartridge inventory is automatically performed each time the library is
powered on, each time a cartridge is inserted or removed from the library, and
each time a magazine is inserted into the library. You can view the cartridge
inventory to quickly determine which cells contain cartridges and whether a
cartridge is loaded in a tape drive.
Magazine inventory (slots)
To view the magazine inventory:
1.
1.1.
1. At the Home screen, press Lib.
Drive
Drive ID
Interface
Drive Configuration
Library SCSI Bridge
Select Back
Library SCSI Bridge
Drive: nn
Modify OK