Datasheet

APRIL 2007 STORAGELOADER 2U LTO
153
VIEWING BASIC TAPE DRIVE INFORMATION
LVD SCSI OR FIBRE CHANNEL TAPE DRIVE—INTERFACE
To view a tape drive’s interface information:
1.
1.1.
1. At the Home screen, press Drive.
If necessary, enter the operator panel password (see page 78).
2.
2.2.
2. Press until the selection arrow ( ) points to Interface.
3.
3.3.
3. Press Select.
4.
4.4.
4. Press or to toggle between tape drives (if more than one tape drive is
installed), and then press Select.
SCSI Tape Drive
Drive
Drive ID
Interface
Drive Configuration
Library SCSI Bridge
Select Back
Drive SCSI ID (or Fibre Channel)
Source Drive
01 02
Address: 0051
Drive n: (empty)
Select Back
Drive SCSI ID
Drive nn
SCSI ID: n
Modify OK
–+
+–