Datasheet

APRIL 2007 STORAGELOADER 2U LTO
151
VIEWING BASIC TAPE DRIVE INFORMATION
4.
4.4.
4. Press until the selection arrow ( ) points to the setting that you wish
to view.
5.
5.5.
5. Press Select.
6.
6.6.
6. Repeat these steps to view the library’s settings.
7.
7.7.
7. Press Back (as needed) to return to the Home screen.
VIEWING BASIC TAPE DRIVE INFORMATION
LVD SCSI TAPE DRIVE—BRAND AND SERIAL NUMBER
To check a tape drive’s type and serial number:
1.
1.1.
1. At the Home screen, press Drive.
If necessary, enter the operator panel password (see page 78).
Library Settings
Operation Mode
Ethernet
Display Settings
Storage Settings
Restore Defaults
Select Back
To change the... See...
Emulation mode page 55
Operation mode (Random or Sequential) page 57
Ethernet settings page 65
Display settings page 40
Storage settings (slot count)
(I/E port enabling)
page 45
page 47
To restore the default settings page 81