Datasheet

APRIL 2007 STORAGELOADER 2U LTO
125
REMOVING CARTRIDGES FROM THE LIBRARY
3.
3.3.
3. Press Select, and then press or to move through the choices. When the
screen shows your “source” (moving from) choice, press Select.
4.
4.4.
4. When the following screen appears, press Select.
5.
5.5.
5. Press OK to continue, or Back to cancel the action.
 During the export, the front panel displays an Export Active message.
 After a successful export, the library displays this confirmation message:
Export Good. Once the message appears, press OK to continue.
6.
6.6.
6. Remove the cartridge:
 Press the I/E Port lock button. The unlock icon flashes ( ) while the
library initiates the unlock.
 Once the library unlocks the door (the unlock icon remains
illuminated ), open it by pulling the door latch toward you. Slide the
drawer out to the end of travel. Swing the handle down and out of the
way to access the cartridge.
 Remove the cartridge and close the door (the lock icon illuminates
green ).
7.
7.7.
7. Press Back (as needed) to return to the Home screen.
Export: Source
Slot: n: (bar code number)
Select Back
Export
Destination I/E Port
01
I/E Port 1: (empty)
Select Back
+–
–+
–+