Datasheet

110
PRODUCT MANUAL 1016988
CHAPTER 4—USING THE REMOTE MANAGEMENT UTILITY
Drive CUP Tape Drive Code Update – Use this option to update the code in
the tape drive(s). The following figure shows the options for updating the
code.
Choose the options, press Select, and then follow the instructions as shown
below.
When you press the Select button, the following screen appears. Once you
determine that it is acceptable to continue, press the OK button.
!
! !
! Important
Make sure that you select and download the correct firmware
files. Firmware for other Tandberg Data Corporation products
is not compatible with the tape drives.
Caution
Do not attempt to perform library operations or power down the library until after
it automatically resets.