Datasheet

APRIL 2007 STORAGELOADER 2U LTO
93
VIEWING THE HOME PAGE
 The slot numbers begin with the right magazine and continue with the
left magazine.
 The storage cells decrease or increase based on the I/E Port setting
(enabled or disabled). Disabling the I/E Port increases the storage cell
count. See “Enabling and Disabling the I/E Port” on page 47.
 Tape Drives–The addresses for the tape drives are defined as follows:
 Robot–The address for the robot is 97.
Type: Number This indicates the type of the address (I/E port, slot, robot, or
tape drive).
Status This indicates the status (POVA) of the address, as follows:
Label Valid Indicates whether the bar code label information for the element
is considered valid (1) or questionable (0). The bar code label information is
considered questionable if the library had a problem reading the label.
Label If the element contains a cartridge, this field provides the bar code
label information for the cartridge. If the cartridge does not contain a bar code
label, it shows the cell number (the same as the address). information for the
cartridge. If the cartridge does not contain a bar code. This field also indicates
the type of data cartridge (L1=LTO1, L2=LTO2, and L3=LTO3).
Tape drive style Location Element Address
Single full height Default 81
Second half height Top 82
Single half height Bottom 81
Letter or Number Definition
“P” Slot Present
“O” Slot Occupied
“V” Slot Occupied and Valid
“A” S l o t A c c e s s i b le
1Yes
0No