Datasheet

92
PRODUCT MANUAL 1016988
CHAPTER 4—USING THE REMOTE MANAGEMENT UTILITY
INVENTORY
The Inventory section provides information from the library’s cartridge
inventory. The library maintains a cartridge inventory to keep track of where
cartridges are located. An inventory is automatically performed each time the
library is powered on, each time a cartridge is inserted or removed from the
library, and each time a magazine is inserted into the library. In performing an
inventory, the library checks for cartridges in the cells and scans each
cartridge’s bar code label.
Note: You can move the cursor over any inventory location to view that
location’s status.
The Inventory section includes the following information:
SCSI Address This indicates the element address. Element addresses identify
locations within the library that can accept a cartridge. The addresses are
defined as follows:
 Slots–Address 0 through 23 represent magazine slots. Slots 11, 12, 23, and 24
are blocked.
Figure 4-4 Remote Management Utility–Inventory page