Datasheet

APRIL 2007 STORAGELOADER 2U LTO
87
VIEWING THE HOME PAGE
VIEWING THE HOME PAGE
This is the “home page” for the utility. The Home page provides information
in four sections. See Figure 4-1 to view the Home page.
 Library Information (Home/Info) – shown in Figure 4-1
 Library Status (Home/Status) – shown in Figure 4-2
 Tape Drive Status (Home/Status) – shown in Figure 4-2
 Inventory (Home/Inventory) – shown in Figure 4-4
LIBRARY INFORMATION PAGE–SCSI CONFIGURATION
The library information page (the Home page) provides this information:
Device This shows the library and tape drive or tape drives installed (the
above screen shows one Hewlett Packard LTO-2 tape drive installed). The
StorageLoader 2U LTO is configured for:
 One or two LTO-2 half height (HH) tape drive(s)
 One or two LTO-3 half height (HH) tape drive(s)
 One LTO-3 full height (FH) tape drive
Vendor This shows the manufacturer of the product.
Product This shows the identification for the library and tape drive(s).
Serial Number This lists the serial numbers of the individual devices.
Firmware Revision This shows the firmware revision of each device installed
– the library and tape drive(s).
SCSI ID:LUN This shows the SCSI ID for the tape drive(s) and the library.
LIBRARY INFORMATION PAGE–FIBRE CHANNEL CONFIGURATION
WWNN World-Wide Node Name. This shows the number for the WWNN,
which is the unique identifier of the device in a Fibre Channel network
environment.