Instructions

tams elektronik
PZS-2 English
Programming step 3: Saving the settings
After having set the phases´ length for a stop at the trimmer, connect
the programming input "save" (14) to earth (4) intermittently.
N.B: Before closing the earth contact make sure the LED on the module
flashes. If it does not the module is not in the programming mode and
you cannot save any settings. The number of the light pulses between
the pauses indicates for which stop the settings at the trimmer are
saved.
As long as the connection to earth is held the LED lights and indicates
that the settings are saved.
Tip
Especially if you use all possible connections of the module we advise
you to mount 2 push-button switches (not included in the package) into
the connections between the programming inputs and the earth
connection.
Page 35