Instructions

tams elektronik
English PZS-2
Programming step 2: Setting the phases´length
By adjusting the trimmer you set the length of the phases accelerating,
halt and braking for the 5 stops. In state of delivery the phases are set
to the shortest possible length. Test the module with these settings
first. Choose the stop you want to program (see programming step 1)
and prolong the phases by turning the adjusting screw to the right.
N.B: The settings only take effect if you save them before choosing the
next stop for programming (see programming step 3).
Trimmer Phase Min. length (approx.)
Trimmer A R23 Accelerating 1 sec.
Trimmer B R20 Braking 1 sec.
Trimmer H R1 Halt 4-5 sec.
Page 34