Instructions

tams elektronik
!
Power-Block English
Connection example 2
In the example, the Power-Block is used to connect the loads
connected to the outputs of a circuit to the common return conductor
(RC) of the circuit. In the example, two different circuits are connected
to sections A and B, which are electrically isolated from each other.
Please note:
Never connect the return conductors of different circuits together to
the same section of the Power-Block. Otherwise the connected circuits
may be irreparably damaged.
If more than 12 connections are required, the two sections can be
connected by connecting the two connectors of X2. Then, however,
only one circuit may be connected!
Page 15