Instructions

tams elektronik
English Power-Block
7. Connecting the Power-Block
Connection example 1
The example shows the common connection of a larger number of
consumers to one power supply, e.g. to
 an AC voltage transformer
 a direct voltage supply
 a booster
Connection X2 is used here to connect a 13th consumer.
Note: When connected to DC voltage, one of the two LEDs on the
board lights up to indicate on which side the positive voltage (+) is
applied. When connected to AC voltage, both LEDs light up.
If more than 13 connections are required, several power blocks can be
cascaded:
Page 14